Roman Blinds - Fitting Instructions

Instructions for fitting in the recess
Step 1

Hold baton in place and push a pencil or other tool through holes to mark drilling spot.
Drill hole.
Push fixing (not supplied)in to hole
Fix baton to window recess with screw. (not supplied)

Step 2

Peel off self adhesive on velcro (supplied) and stick onto baton.

The velcro on your Roman Blind will stick to this to allow it to hang.

Step 3

Fix Clevise to wall approximately half way from sill to top of recess. This will be either in the recess to outside the window depending on your requirements. Screws are provided with clevise.

NB right handed people usually fit this to the right hand side of window.


Instructions for fitting outside the recess

These instructions are the same, except for the baton; this should be fixed approximately 5cm above the recess of the window. Ensure that when blind is extended it covers the entire window; to below the sill.

Important

It is recommended that all Roman Blinds are professionally cleaned.

Home | Site map | Webdesign
Tel: 01793 611051 Copyright © 2008. The Complete Curtain Service. All rights reserved.

Made-To-Measure

Tel: (01793) 611051
Shop Opening Hours
Mon - Fri    9am - 4.30pm

Fantastic selection of high quality fabrics.

Order on line and receive your tailor made curtains or blinds through the post within 7-10 days.

Buy today, don't delay!

 

Roman Blinds - How to fit

 

Baton will be fixed to ceiling of window for recess fitted blinds.

 

 

The Clevise allows excess cord to be tied when blind is in up position. The clevise can be fixed to the left or right hand side.